PLOT REPORT
-----------

Report File:        W:\Kallysta\Dev. Electronique\Carte Led15Proc\v2.0\Bottom Paste\Led15procv2BotPaste (PCB - PLOT REPORT).txt
Report Written:     Friday, October 21, 2016
Design Path:        W:\Kallysta\Dev. Electronique\Carte Led15Proc\v2.0\Bottom Paste\Led15procv2BotPaste.pcb
Design Title:       
Created:            28/07/2015 15:34:02
Last Saved:         21/10/2016 09:20:31
Editing Time:       1626 min
Units:              mm (precision 3)


Device Settings
===============


Gerber Settings
===============

    Leading zero suppression.
    G01 assumed throughout.
    Line termination <*> <CR> <LF>.
    3.5 format absolute inches.
    Format commands defined in Gerber file.
    Aperture table defined in Gerber file.
    Hardware arcs allowed.



Plots Output
============

    Plot Job: "W:\Kallysta\Dev. Electronique\Carte Led15Proc\v2.0\Bottom Paste\Led15procv2BotPaste.mop"


Gerber Output
=============

W:\Kallysta\Dev. Electronique\Carte Led15Proc\v2.0\Bottom Paste\Gerber Kallysta\Led15procv2BotPaste - Bottom Paste Mask.gbr

    Layers:
    ---------------------
    Bottom Paste Mask
    Board Outlines

    D-Code Shape  (thou)
    -----------------------------------------------
    D15    Round 5.00
    D17    Rectangle 31.50 X 39.37
    D19    Rectangle 31.50 X 39.37  Rotation 90
    D22    Rectangle 31.50 X 35.43  Rotation 90
    D77    Rectangle 82.68 X 118.11  Rotation 90
    D78    Rectangle 27.56 X 62.99  Rotation 90
    D79    Rectangle 25.59 X 62.99

End Of Report.