PLOT REPORT
-----------

Report File    : \\psf\Home\Documents\Dev Electronique\Carte SAS9\SAS9 (PCB - PLOT REPORT).txt
Report Written : Tuesday, May 27, 2014
Project Path   : \\psf\Home\Documents\Dev Electronique\Carte SAS9\SAS9.prj
Design Path    : \\psf\Home\Documents\Dev Electronique\Carte SAS9\SAS9.pcb
Design Title   : 
Created        : 07/11/2013 16:35:07
Last Saved     : 27/05/2014 14:54:23
Editing Time   : 3332 min
Units          : mm (precision 3)


Device Settings
===============


Gerber Settings
===============

    Leading zero suppression.
    G01 assumed throughout.
    Line termination <*> <CR> <LF>.
    3.3 format absolute mm.
    Format commands defined in Gerber file.
    Aperture table defined in Gerber file.
    Hardware arcs allowed.



Plots Output
============


Gerber Output
=============

\\psf\Home\Documents\Dev Electronique\Carte SAS9\Gerber Kallysta\SAS9 - Bottom Pelable.gerber

    Layers:
    ----------------
    Bottom Pelable
    Board Outlines

    D-Code  Shape  (mm)
    -------------------
    D10     Round 0.120
    D26     Round 0.127

End Of Report.