Design Rule Check Report
------------------------

Report File:        \\psf\Home\Documents\Dev Electronique\Carte SAS9\v2.0\SAS9 (PCB - Design Rule Check Report).txt
Report Written:     Friday, January 15, 2016
Project Path:       \\psf\Home\Documents\Dev Electronique\Carte SAS9\v2.0\SAS9.prj
Design Path:        \\psf\Home\Documents\Dev Electronique\Carte SAS9\v2.0\SAS9.pcb
Design Title:       
Created:            07/11/2013 15:35:07
Last Saved:         15/01/2016 12:04:39
Editing Time:       5442 min
Units:              mm (precision 3)


Results
=======

Component to Component error (Cm-Cm) at (59.570 174.350) on layer "[Top]".
    J6 - TP19, Gap is 0.000.
Component to Component error (Cm-Cm) at (59.620 155.850) on layer "[Top]".
    J6 - TP20, Gap is 0.000.
Component to Component error (Cm-Cm) at (69.750 332.275) on layer "[Top]".
    U3 - C7, Gap is 0.000.
Component to Component error (Cm-Cm) at (9.090 329.500) on layer "[Top]".
    J10 - C41, Gap is 0.000.
Component to Board error (Cm-B) at (11.218 243.830) on layer "[Top]".
    J11.

Number of errors found : 5


Settings
========


Spacings

=========

Tracks        Yes
Pads and Vias Yes
Shapes        Yes
Text          Yes
Board         Yes
Drills        Yes
Components    Yes


Manufacturing

==============

Drill Breakout                  No
Drill Backoff                   No
Silkscreen Overlap              No
Copper Text In Board            No
Min Track Width                 Yes
Min Annular Ring                Yes
Min Paste Size                  No
Vias In Pads                    No
Unplated Vias                   Yes
Unplated Pads With Inner Tracks No


Nets

=====

Net Completion               Yes
Dangling Tracks              Yes
Net Track Length Differences No



End Of Report.