----------------------------------------------------
Design rule check                               3.11
--- --- --- --- --- --- --- --- --- --- --- --- ----
Units          : mm
Parameter file : O:\cfg\Drc\CLS-PAT-6.cfg
Options        : Build-Netlist (Job-Netlist) 

Layer Check (outer) : E601489-01
Exclude Text
Use-Netlist
Relative tolerance: 2.500000

Pad to Pad                   <   0.1500      0
Pad to Track                 <   0.1500      0
Track to Track               <   0.1500      0
Same Net Spacing Obj to Obj  <   0.1500     24
Minimum Track                <   0.1500      0
Track cut-in                 <   0.1500      0
Peelable SMD                 <   0.1500      0
Peelable Circle              <   0.1500      0
Single Track                                10

Layer Check (outer) : E601489-16
Exclude Text
Use-Netlist
Relative tolerance: 2.500000

Pad to Pad                   <   0.1500      0
Pad to Track                 <   0.1500      0
Track to Track               <   0.1500      0
Same Net Spacing Obj to Obj  <   0.1500      0
Minimum Track                <   0.1500      0
Track cut-in                 <   0.1500      0
Peelable SMD                 <   0.1500      0
Peelable Circle              <   0.1500      0
Single Track                                 9

Layer Check (DRILL) : E601489-60
Use-Netlist

Pad to Pad                   <   0.2500      0
Pad to Track                 <   0.2500      0
Track to Track               <   0.2500      0
Overlapping Pads                             0

Layer Check (silk) : E601489-22
Use-Netlist

Minimum Track                <   0.1700      0

Layer Check (mask) : E601489-21
Use-Netlist

Pad to Pad                   <   0.1000      8
Pad to Track                 <   0.1000      0
Track to Track               <   0.1000      0

Layer Check (mask) : E601489-31
Use-Netlist

Pad to Pad                   <   0.1000     50
Pad to Track                 <   0.1000      0
Track to Track               <   0.1000      0

Layer/Layer Check (outer.DRILL) : E601489-01 / E601489-60
Use-Netlist

Ring Lay2->Lay1    <   0.1250      0
Min Pad Clearance  <   0.3000      0
Min Track Clear    <   0.3000      0
Center to Center   >   0.0200      0
Partial Overlap                    0

Layer/Layer Check (outer.mask) : E601489-01 / E601489-21
Use-Netlist

Ring Lay1->Lay2    <   0.1000     24
Min Overhang Clear <   0.1000      1
Min Pad Clearance  <   0.1000      0
Min Track Clear    <   0.1000     17
Partial Overlap                    0

Layer/Layer Check (outer.rout) : E601489-01 / E601489h61
Use-Netlist

Min Pad Clearance  <   0.2500      0
Min Track Clear    <   0.2500      0

Layer/Layer Check (outer.rout) : E601489-01 / E601489-61
Use-Netlist

Min Pad Clearance  <   0.2500     24
Min Track Clear    <   0.2500      0

Layer/Layer Check (outer.DRILL) : E601489-16 / E601489-60
Use-Netlist

Ring Lay2->Lay1    <   0.1250      0
Min Pad Clearance  <   0.3000      0
Min Track Clear    <   0.3000      0
Center to Center   >   0.0200      0
Partial Overlap                    0

Layer/Layer Check (outer.mask) : E601489-16 / E601489-31
Use-Netlist

Ring Lay1->Lay2    <   0.1000     24
Min Overhang Clear <   0.1000      1
Min Pad Clearance  <   0.1000      3
Min Track Clear    <   0.1000     18
Partial Overlap                    0

Layer/Layer Check (outer.rout) : E601489-16 / E601489h61
Use-Netlist

Min Pad Clearance  <   0.2500      0
Min Track Clear    <   0.2500      0

Layer/Layer Check (outer.rout) : E601489-16 / E601489-61
Use-Netlist

Min Pad Clearance  <   0.2500     24
Min Track Clear    <   0.2500      0

Layer/Layer Check (silk.mask) : E601489-22 / E601489-21
Use-Netlist

Min Pad Clearance  <   0.0990      0
Min Track Clear    <   0.0990      0
Partial Overlap                    0

Layer/Layer Check (mask.silk) : E601489-21 / E601489-22
Use-Netlist

Min Pad Clearance  <   0.0990      0
Min Track Clear    <   0.0990      0
Partial Overlap                    0
----------------------------------------------------